Fixing computer can not boot

One computer damage that I often find is that computer problems can not boot. Here are some cases that can occur, such as: computer can not boot with an error, the computer is booting, but then came a bluescreen and the computer is booting, but then restart again.

For computer problems after booting appear bluescreen, I have discussed in a post on how to fix the computer bluescreen.


So is the cause and how to fix computer restarts frequently and fix computer hang I have described in a post some time ago yag. As for the computer can not boot at all, here are some of the causes that can occur, including:

1. The computer can not boot because the hard drive is not detected
It is usually marked by the appearance of the message Disk Boot failure. To solve this problem, we can do some things diataranya:
check the condition of the cable to the IDE or SATA hard drive, make sure it is installed correctly.
to 2 IDE hard drive attached to one cable, check jumper positions for Master and Slavenya settings that should not be confused.
check whether the hard drive has been detected by the BIOS or not, try at-detect one by one. If the same BIOS detected wrote ga means the problem is with the hard drive.
try to hold the disk surface, to live the hard drive will feel the vibration.
2. The computer can not boot because of memory problems and VGA Card.
Usually marked by a beep is heard repeatedly, and display monitors that do not want ngangat. To check it:
try off the first Memory or VGA Card, pin it cleaned and paired it correctly.
try installing the memory in the other slot.
memory for more than one, sometime the other dislodged and tested one by one.
if each beep, try to replace him sometime Memory or VGA card.
3. The computer will not boot because the processor overheating.
Processor overheating problem that could cause the computer to hang, the computer restarts itself even not want to boot the computer.
Try to check the condition Processor Heatsink and fan
See also Processor temperature in Hardware Monitor in the BIOS.
4. The computer can not boot because the hard drive or Windows system that corupt.
It can be seen from a message indicating that the file is corrupted or missing. To fix this:
Try to check first the condition memory, if installed more than one and are not compatible, usually appear corupt windows system error, so unplug the memory which are not similar.
Repair hard drive as I described in the article how to fix hard drive
Windows repair or reinstall Windows computer system.
Maybe that's some of the causes of the computer can not boot and how to check and repair. To diagnose and fix your computer can not boot from it we can also use UBCD for Windows CD or Hiren's Boot CD. Good luck..

Add This To Del.icio.us Tweet/ReTweet This Share on Facebook StumbleUpon This Add to Technorati Digg This